VAULTER PITS and RUNWAYS

Pole Vault Runways and Platforms

Kanstet IAAF Approved Runways for all levels of pole vault. Custom made out of TEXAS. 48″ wide by 150′ long. Made out of galvanized steal, 5/8″ plywood and a proprietary rubber top. All runways can easily be a custom color or choice. Runways and platforms are priced separately. Ask for the Runway and Pit combo price.

A brand that you have come to know and trust for your pole vaulting needs now sells their signature brand pole vault and high jump landing systems.

VAULTER Brand pits are made with the highest of quality for the highly active high jumper and pole vaulter.
These pits are outstandingly made with quality and proficiency or we would not have our name on them!

VAULTER Pole Vault Pits have one of the best guarantees in the industry:

10-year guarantee on workmanship and materials. Lifetime guarantee on handles and straps.

VAULTER Pits use the best materials in the industry:

UV Resistant coated 18oz or 22oz vinyl

Vinyl coated polyester mesh

Top quality foam in a cross-layered design

Bonded polyester thread

Double stitch all seams and hems for extra strength

#10 nylon zippers

Heavy duty 2 inch webbing handles

Zinc plated D rings and snap hooks

Includes 2 inch foam top pad

Optional weather cover

10 year guarantee on materials and workmanship

By far the strongest materials available in the industry go into VAULTER PITS.

Colors available (you can get one color for your pit, and another color for your top pad to show off school spirit):
Yellow, Black, Red, Blue, Green, Purple, Navy Blue, Maroon, Orange or Gray.

Logos can also be applied to your pit for an additional fee.

VAULTER ELITE PRO

21'6" X 27' X 32"

This pit is designed for the serious pole vaulting club, elite athlete or someone that wants and expects the best of the best. Front buns and rear buns for that extra depth in the back and fronts of the landing area’s. This is a very well build pole vault pit made in Texas. A state where companies know how to make tough, rugged equipment built to last!

This landing system covers all USATF, NFHS, IAAF, and NCAA requirements.

This landing system comes with a 2″ top pad with a rugged buckles system to keep that pad in place.

You can upgrade to very nice 3″ or 4″ top pad that will set you apart from all of the other pit manufactures.

 This thicker top pad is a saver when you start to look at comfort and landing reliability. No more tearing and see-through top covers after a year of use. Last longer than conventional pads when you increase pad thickness.

Comes with a new, heat seamed weather cover to prevent rain coming through. Our material is not the cheap vinyl that you see on some of these top covers.

We have all seen how these companies have compromised in their quality of materials.

It all comes down to trusting the process and seeing great material and supplies from the start.  A well built weather cover made to last.

VAULTER Pits use the best materials in the industry:

We compare our products to others and we know that we are making a quality product that does not cut corners.


21 oz. knife coated vinyl with 16 oz. liquid urethane spread on the outside.

This totals 37 oz. Material.


These pits are made of THREE DENSITIES of foam, which makes them more long-lasting than other pits. (Foam, by its nature, naturally breaks down and degenerates over time whether you use it or not. By using 3 densities, our pits will last longer than others).

VAULTER HIGH AND COLLEGE

21'6" X 24' X 32"

This pit is designed for the college and high school athlete that takes pole vaulting seriously. If you have high school and pole vault athletes that are jumping or will be jumping 16 plus feet ion the near future, this is the pit for you. Front buns for that extra depth in the front of the landing areas. This is a very well build pole vault pit made in Texas. A state where companies know how to make tough, rugged equipment built to last!

This landing system covers all USATF, NFHS, IAAF, and NCAA requirements.

This landing system comes with a 2″ top pad with a rugged buckles system to keep that pad in place.

You can upgrade to very nice 3″ or 4″ top pad that will set you apart from all of the other pit manufactures.

 This thicker top pad is a saver when you start to look at comfort and landing reliability. No more tearing and see-through top covers after a year of use. Last longer than conventional pads when you increase pad thickness.

Comes with a new, heat seamed weather cover to prevent rain coming through. Our material is not the cheap vinyl that you see on some of these top covers.

We have all seen how these companies have compromised in their quality of materials.

It all comes down to trusting the process and seeing great material and supplies from the start.  A well built weather cover made to last.

VAULTER Pits use the best materials in the industry:

We compare our products to others and we know that we are making a quality product that does not cut corners.


21 oz. knife coated vinyl with 16 oz. liquid urethane spread on the outside.

This totals 37 oz. Material.


These pits are made of THREE DENSITIES of foam, which makes them more long-lasting than other pits. (Foam, by its nature, naturally breaks down and degenerates over time whether you use it or not. By using 3 densities, our pits will last longer than others).

VAULTER ESSENTIAL

21.6' X 24" X 32"

This pit takes care of all your essential needs from high school through middle school. This pit will still fit all of your needs because of the depth of foam in the landing area. The difference is no front buns and a foot around the edges removed. One of the best options for a middle school, high school situation. Front buns for that extra depth in the front of the landing areas. This is a very well build pole vault pit made in Texas. A state where companies know how to make tough, rugged equipment built to last!

This landing system covers all USATF, NFHS, IAAF, and NCAA requirements.

This landing system comes with a 2″ top pad with a rugged buckles system to keep that pad in place.

You can upgrade to very nice 3″ or 4″ top pad that will set you apart from all of the other pit manufactures.

 This thicker top pad is a saver when you start to look at comfort and landing reliability. No more tearing and see-through top covers after a year of use. Last longer than conventional pads when you increase pad thickness.

Comes with a new, heat seamed weather cover to prevent rain coming through. Our material is not the cheap vinyl that you see on some of these top covers.

We have all seen how these companies have compromised in their quality of materials.

It all comes down to trusting the process and seeing great material and supplies from the start.  A well built weather cover made to last.

VAULTER Pits use the best materials in the industry:

We compare our products to others and we know that we are making a quality product that does not cut corners.


21 oz. knife coated vinyl with 16 oz. liquid urethane spread on the outside.

This totals 37 oz. Material.


These pits are made of THREE DENSITIES of foam, which makes them more long-lasting than other pits. (Foam, by its nature, naturally breaks down and degenerates over time whether you use it or not. By using 3 densities, our pits will last longer than others).

To Subscribe Click Here

To buy this issue Click Here


BUY IT ALL

We also have a 19'9" X 20'5" X 28 Pit for Middle School and small schools.